What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 00:43
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Upvotes:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Over 3,000 Private Credit Deals From Just 20 Analysts Raise Questions on Wall Street - Bloomberg.com
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
what exactly is a ‘surge’ protector?
eight
Here is a simplified AC power diagram.
What does a fuse do?
The Toyota Supra Won't Stay Dead For Long - Motor1.com
But… the neutral is now “floating” because of the 1 ohm resistance.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
[image of Common-mode choke]
2024–10–16 [ OO OLAOYE OYEBODE ]
I post the exact comment here.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
An unexpected Seahawks player appears in Madden 26 reveal trailer - Field Gulls
There are three different concepts here that are getting confused.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
One is “what exactly is in a ‘surge protector’ ? ”
US researchers solve tokamak plasma mystery with elusive ‘voids’ discovery - Interesting Engineering
One
Now when you have a certain ac resistance, then a current flows in a loop.
This is where the MOV conducts again, and dissipated the energy.
Big Cyberpunk 2077 Updates Were Thought To Be Done, But 2.3 Patch Launches Soon - GameSpot
So, the voltage could go up to 500 volts, and the fuse will not open up.
the problem then depends on "how fast does the fuse operate?".
A circuit breaker is similar, but is resettable.
What are some cool confidence hacks?
He then describes the function of a fuse.
Because the load is inductive, the current lags the voltage.(by a bit).
It seems Mohan does not understand the difference between a comment and an Answer.
What are some ways to improve speed in sprinting, running uphill, and long/middle distance running?
But it can get overloaded, and no longer works.
2024–10–14 [Omar Gharbi Omar Gharbi ]
A fuse is a non-resetable over current circuit protector.
I'm straight, so why do I love watching guys cum?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This device then solves the entire problem.
5 foods to consume empty stomach to stabilize blood sugar levels naturally - Times of India
He then describes Rainy Season and Lightning.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Semiconductor Supplier GlobalFoundries to Spend $16B to Boost US Chip Production - Investopedia
This one hit behind the barn.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but this device (an Inductor) … impedes the rapid changes in the current.
For this case there are devices called Metal oxide varistors (MOV).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The other is “what does a “fuse” do?”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
so, what happens?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Barnstars:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Edit 2024–10.
In schematic diagrams this is the symbol for a fuse:
[old diagram got deleted by accident]
It also is a device that limits the change in current flow.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The MOV will conduct when the voltage exceeds 50% of line voltage.
but I think this circuit , shows a few more pieces.
This is 'the assistant's answer'
This is where this question deviates from being a 'generic' question, and becomes more specific.
What is lightning?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The third is lightning and “how it gets conducted into a home.”
First Sentence:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
At least they know the answer if they wanted it.
He then asserts :
2024–10–10[John johnson John Johnson ]
(Dc diagram shown, AC is similar).
There are two important concepts here.
At one ohm, the resistor has a maximum of 1 watt power.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The bolt then partially travels down the line to your home.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
An AC voltage/ current source, and an ac inductive load.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
a photo is worth a thousand words.
These are simplified answers to the original question, and does not change anything I wrote above.